Hioki 9518-02, Instruction Manual

Page: 58 / 86

52
────────────────────────────────────────────────────
5.4 Commands Specific to the 3157
────────────────────────────────────────────────────
:SYSTem:OPTion:CCHange
■ Sets the current changeability in the TEST state.
:SYSTem:OPTion:CCHange?
■
Queries the current changeability in the TEST state.
Syntax :SYSTem:OPTion:CCHange
_<data>
<data> Numerical data in NR1 format between 0 and 1
Function
Sets the current changeability in the TEST state.
0: Not changeable
1: Changeable
The numerical value can be in NRf format, but any digits after the decimal
point will be rounded.
Example
Transmission :SYSTem:OPTion:CCHange 1
The current changeability in the TEST state is set to "Changeable."
Error
If <data> is other than numerical value described above, an execution error
occurs.
The execution of this command in a state other than the following states
causes an execution error:
･ READY state
･
Optional function setting screen
Syntax :SYSTem:OPTion:CCHange?
Function Returns the setting for the current changeability in the TEST state as a
numerical value in NR1 format.
<data>
Numerical data in NR1 format between 0 and 1
Example
Response
If headers are on :SYSTEM:OPTION:CCHANGE 1
If headers are off 1
Error
If the response message is longer than 300 bytes, a query error is generated.