Hioki 9518-02, Instruction Manual, Page: 15 / 86

9
────────────────────────────────────────────────────
4.1 Setting the GP-IB Device Address
────────────────────────────────────────────────────
Address switch for TALK ONLY
Chapter 4
Operation
4.1 Setting the GP-IB Device Address
・ The address of the 3157 unit (called the device) on the GP-IB bus can be set to
any number from 0 to 30.
・ Use the Address switches on the GP-IB panel to set the device address.
・ On dispatch from the factory, this address is initially set to 1.
・ If this address is (apparently) set to 31, i.e. if all the switches are in the ON
position, then the bus lines of the 3157 are disabled.
・ Always the Address switch for TALK ONLY is in the OFF position, since it is
not used.