Hioki 9518-02, Instruction Manual, Page: 76 / 86

70
────────────────────────────────────────────────────
────────────────────────────────────────────────────
Setting memory 1
Output current value: 25.0 A
Maximum test value: 0.100
Ω
Test time: 60.0 s
Setting memory 2
Output current value: 10.0 A
Maximum test value: 1.00 V
Test time: 10.0 s
Setting memory 3
Output current value: 25.0 A
Maximum test value: 0.100
Ω
Test time: 5.0 s
Setting memory 4
Output current value: 15.0 A
Maximum test value: 1.50 V
Test time: OFF
Setting memory 5
Output current value: 10.0 A
Maximum test value: 0.100
Ω
Test time: 5.0 s
380 OUTPUT 701;":MEAS:RES:RES?"
390 ENTER 701;C$
400 PRINT C$
410 IF BINAND(D,2)=2 THEN
420 OUTPUT 701;":STOP"
430 END IF
440 GOTO Exit1
450 Interrupt: !
460
P=SPOLL(701)
470 OUTPUT 701;":ESR0?"
480 ENTER 701;D
490 IF BINAND(D,8)=8 THEN F=1
500 DISABLE INTR 7
510 OUTPUT 701;"*CLS"
520 RETURN
530 Exit1: !
540
END
Program comments
Line Comment
110-160 Confirm that the 3157 is in the READY state.
170-240 Make test settings.
250 Set SRQ generation conditions(an SRQ interrupt is produced whether
comparator result is "EOM").
260 Attach interrupt handler to SRQ interrupt.
310-330 Check that a test has started.
340-350 Check that a test has finished.
360-440 Query the test results.
450-520 SRQ interrupt
Sample display
25.0,0.020,60.0,PASS
(2) Saving the basic settings
This program sets the 3157 to the following test values, and then save them in
Setting memory.