Hioki 9518-02, Instruction Manual

Page: 45 / 86

39
────────────────────────────────────────────────────
5.4 Commands Specific to the 3157
────────────────────────────────────────────────────
:CONFigure:TIMer
■ Sets the test time.
:CONFigure:TIMer?
■ Queries the test time.
Syntax :CONFigure:TIMer
_<data>
<data> Numerical data in NR1 or NR2 format between 0.5 and 999
Function
Sets the test time.
The numerical value can be in NRf format, but rounding is performed for
figures beyond the last valid decimal place.
Note The test time can be used as the basis for the test only when the endless timer
function setting is disabled and when "ON" is selected in the ON/OFF setting
for the test time.
Example
Transmission
:CONFigure:TIMer 60.0
The test time is set to 60.0 s.
Error
If <data> is other than numerical value described above, an execution error
occurs.
The execution of this command in a state other than the READY state causes
an execution error.
Syntax :CONFigure:TIMer?
Function
Returns the test time setting as a numerical value in NR1 or NR2 format.
<data> Numerical data in NR1 or NR2 format between 0.5 and 999
Example
Response
If headers are on :CONFIGURE:TIMER 60.0
If headers are off 60.0
Error
If the response message is longer than 300 bytes, a query error is generated.