Hilti AG 230-S, Operating Instructions Manual

Page: 19 / 269

15
Other accessories
Kwik-Lock quick-release clamping nut
Disc guard with carriage
Dust extraction hood for cutting
DC-EX 230
Vacuum cleaner TDA-VC40/60
3.1 Kwik-Lock quick-release clamping nut for cutting or grinding discs
The Kwik-Lock nut can be used instead of the standard clamping nut. No tools are
then required for changing cutting or grinding discs.
-NOTE-
The Kwik-Lock nut cannot be used in conjunction with abrasive cup wheels, brush-
es, rubber backing pads, tuck pointing discs or diamond cup wheels.
3.2 Disc guard with carriage

The tool should be equipped with the carriage when used for cutting applications.
3.3 Dust extraction hood

In principle, we recommend use of a dust extraction hood and suitable Hilti vacuum
cleaner with the tool for all concrete or stone slitting or cutting applications.
These accessories reduce the amount of dust to which the operator is exposed and
extend the life of the tool and disc.
4. Technical data
Rated voltage 110 V 127 V 230 V 240 V
Rated current 18.4 A 16.9 A 9.7 A 9.4 A
Power input 2000 W 2000 W 2100 W 2100 W
Power output 1200 W 1200 W 1350 W 1200 W
Electric supply frequency 50 Hz 60 Hz 50 Hz 50 Hz
No-load speed 6500 r.p.m. 6500 r.p.m. 6500 r.p.m. 6500 r.p.m.
Drive spindle thread M14 M14 M14 M14
Cutting disc diameter max. 230 mm
Approx. weight (without accessories) 4.3 kg
Weight as per EPTA-Procedure 01/2003 5.5 kg
Double insulation (as per EN 50144) Protection class II
Z
Interference immunity as per EN 55014-2
Radio and television interference suppression as per EN 55014-1
Noise and vibration information (measured in accordance with EN 50144):
Typical A-weighted noise power level
(L
wA
): 103 dB (A)
Typical A-weighted noise pressure level
(L
pA
): 90 dB (A)
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60 745-2-3 prAA: 2006
Surface grinding, (a
h, AG
):
with the vibration-absorbing side handle 7.7 m/s 2
with the hoop handle 8.3 m/s 2
Uncertainty (K) for triaxial vibration value 1.5 m/s 2
Other applications such as cutting-off or wire brushing, may have different vibration
emission values.
Right of technical changes reserved!
Printed: 07.07.2013 | Doc-Nr: PUB / 5069436 / 000 / 00