manualshive.com logo in svg

hilscher NIOT-E-TPI51-EN-RE, User Manual, Page: 158 / 258

Share
Download
hilscher NIOT-E-TPI51-EN-RE User Manual Download Page 158

Configuring and using the fieldbus node

158/258

6. Reconfigure interface: Transfer firmware and configuration into Edge

Gateway

Ø

Click the button 

Reconfigure interface

 in the dialog 

Add new fieldbus

interface config node

.

Figure 102: Dialog box “Add new fieldbus interface config node”

This is necessary to make sure that the following information on the
fieldbus interface in the Edge Gateway can be transmitted later: Firmware,
configuration, and signal definitions

Ø

Click the button 

Add

 in the dialog 

Add new fieldbus interface config

node

.

Ê

This operation causes the transmission of the fieldbus configuration to
the device and the update of the signal definitions to the fieldbus node.

7. Deploy

Ø

Perform a Deploy in the Node-RED. For this purpose, select one of the
three options of the selection list 

Deploy

 in the Node-RED window (top,

right).

ð

The flow will thus be transmitted to the Edge Gateway, and the new
configuration will be applied in the Edge Gateway.

Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM04EN | Revision 4 | English | 2018-08 | Released | Public

© Hilscher 2017 – 2018

Summary of Contents for NIOT-E-TPI51-EN-RE



































































































































































































































































Reviews:

No comments