22.10.2018
22.10.2018
8
9
U S E R M A N U A L
EN
EN
To increase the product life of the device and to ensure a
trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. Taking
into account technological progress and noise reduction
opportunities, the device was designed to reduce noise
emission risks to the minimum.
LEGEND
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
The product satisfies the relevant safety standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER! Applicable
to the given situation (general warning sign).
Use ear protection. Exposure to loud noise may
result in hearing loss.
Wear protective goggles.
Wear protective gloves.
Wear foot protection.
ATTENTION! Electric shock warning!
ATTENTION! Revolving elements!
Class II protection device with double insulation.
While operating, do not expose the machine to
rain and do not leave it outside.
Do not bring hands or feet close to the rotating
machine parts and do not put hands or feet under
the rotating machine parts.
CAUTION! There is the risk of ejection of objects
from the machine!
CAUTION! Maintain a safe distance from nearby
bystanders!
CAUTION! In case of damage to the power cord or
plug, immediately switch off the power supply!
Before servicing and maintenance or when the
machine is not in use, always unplug the machine
from the power supply.
Parameter description
Parameter value
Product name
Electric garden tiller
Model
HT-FORBES-45T
Rated voltage [V~]
/Frequency [Hz]
230/50
Rated power [W]
1500
Rotational speed (no load)
[rpm]
420
Working width [mm]
440
Cutting device size [mm]
⌀
180 /
⌀
220
Protection class
II
Protection rating IP
IPX4
Acoustic power level L
WA
89.44 dB(A)
Uncertainty K=0.99dB(A)
Acoustic pressure level L
PA
80.5 dB(A) (close to the ear)
Uncertainty K= 3dB(A)
Vibration emission value
ah=3.667m/s
2
Uncertainty K=1.5m/s
2
Dimensions [mm]
1300x530x(770÷1170)
Weight [kg]
13.5
TECHNICAL DATA
PLEASE NOTE!
Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual product.
ATTENTION!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
Whenever „device“ or „product“ are used in the warnings
and instructions, it shall mean Electric garden tilleri. Prevent
the device from getting wet. Risk of electric shock! When in
use, do not put your hands or other items inside the device!
Do not cover the ventilation openings!
2.1. ELECTRICAL SAFETY
a)
The plug has to fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock. Never use
a damaged or incomplete plug.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to
rain, in direct contact with a wet surface or operating
in a humid environment. Water ingression into the
device increases the risk of damage to the device
and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
e)
If working with the device outside, make sure to use
an extension lead suitable for external use. Using an
extension lead suitable for external use reduces the
risk of electric shock.
f)
If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
g)
Check regularly that the residual-current device
(RCD) works properly.
h) Do not use the machine if the power cord or the
extension cord is faulty or shows clear signs of
wear. A damaged power cord must be replaced
by a qualified electrician or the manufacturer‘s
maintenance service.
i)
Do not plug a damaged power cord to the wall
socket. Do not touch a damaged power cord until
it is unplugged from the wall socket, since this may
cause electric shock.
j)
During operation, be careful to keep the moving
parts of the machine away from the extension cord
because their contact may damage the extension
cord and cause an electric shock.
k)
In case the power cord gets damaged, first cut off
the power supply to the wall socket and then unplug
the cord from the socket.
2.2. SAFETY AT THE WORKPLACE
a)
Make sure the workplace is orderly and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
b)
Do not use the device in an explosion hazard zone, for
example in the presence of flammable liquids, gasses
or dust. The device generates sparks which may ignite
dust or fumes.
c) Upon discovering damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer‘s support
service.
e)
Only the manufacturer‘s service point may repair the
device. Do not attempt any repairs independently!
f)
If a fire starts, use solely powder or carbon dioxide
(CO
2
) fire extinguishers suitable for use on live devices
to put it out.
g)
Children or unauthorised persons are forbidden from
entering a work station. (A distraction may result in a
loss of control over the device).
h)
During operation with the device it is produced dust
and debris, it is necessary to protect unauthorized
persons against their harmful effects.
i)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
j)
Please keep this manual available for future reference.
If this device is passed on to third parties, the manual
must be passed on with it.
k)
Stop operating the machine if there are people
(especially children) or pets nearby.
l)
The machine must only be used in daylight or with
artificial light that guarantees good visibility.
m) Do not use the machine in moist environments.
n)
Avoid using the machine in bad weather conditions,
especially during lightning storms or if there is a risk
of a lightning storm.
o) When operating, the machine ejects material that
comes into contact with the blades, such as stones,
hard pieces of clay, twigs etc. Care should be taken
not to injure bystanders and animals near the working
area. The ejected hard or sharp elements can cause
injuries.
REMEMBER!
When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine and
properly trained and who reviewed this operating
manual and received training in occupational health
and safety.
c) The machine is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/ or knowledge unless they are
supervised by a person responsible for their safety
or they have received instructions on how to operate
the machine.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
e) Use personal protection equipment as required
for working with the device, specified in section 1
(Legend). The use of correct, approved personal
protection equipment reduces the risk of suffering
an injury.
f)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
g)
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
h)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
i)
Remove all adjusting tools or spanners before
turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
j)
The device is not a toy. Children should be supervised
so that they will not play with the device.
k)
When working with the machine, wear proper
footwear and long trousers. Any use of the machine
barefoot or wearing open shoes is forbidden.
l)
Always make sure that the machine ventilation
openings are free from dirt (e.g. stones, grass,
branches, leaves)
m) Incomplete or modified machines can be dangerous
and must not be used.
n) Always maintain a stable posture when using the
machine on a slope.
o)
Running with the machine is forbidden. The machine
must be operated at walking speed.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use appropriate tools
for the given task. A correctly selected device will
perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
