manualshive.com logo in svg

Hillrom 900 Series, Instructions For Use Manual

Share
Download
Hillrom 900 Series Instructions For Use Manual Download Page 84

Page 78

171051(12) - Hillrom™ 900 Electric Bed Instructions for Use

Steam Cleaning

These beds can be steam cleaned. However, in order to avoid any damage or 
deterioration caused by high pressure or abnormal surface temperature, the 
following precautions should be taken:

• avoid any excess water and use reduced steam pressure with microfiber 

support when cleaning electrical components (control unit, actuators, lateral 
caregiver units, half-siderails with keypads, remote controls and control 
cluster arms),

• do not use accessories such as high pressure hoses (A). It is preferable to 

use soft non-metallic brushes (B) and microfiber support (C) in such a way as 
to reduce the pressure to an acceptable level.

C

A

B

Clean with a microfiber support only.

Clean with a soft non-metallic brush or a microfiber support.

Steam cleaning areas

• prevent water and steam from getting into connectors that are not in use,
• do not brush and use reduced pressure on labels and markings,
• carefully dry and test the bed before reuse.

Summary of Contents for 900 Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands