manualshive.com logo in svg

Hillrom 900 Series, Instructions For Use Manual

Share
Download
Hillrom 900 Series Instructions For Use Manual Download Page 42

1

2

2

Page 36 

171051(12) - Hillrom™ 900 Electric Bed Instructions for Use

The HiLow lock out on the foot control pendant or on the control unit on a flexible 

arm does not lock out the HiLow pedal, which remains operational. By default, 

the pedal is locked to avoid accidental movement. It is necessary to unlock the 

HiLow pedal before use.

After about one minute, caregiver mode is deactivated automatically.

Raising/lowering the head and thigh sections

If the bed is fitted with an electric thigh section with the 

AutoContour™ function, the thigh section function must be inhibited 

using the control unit in order to move the head section only.

Before adjusting the head section, check that there are no obstacles 
preventing the section from being lowered or moving (e.g., limbs, 
electric cables, foreign bodies or accessories). An intermittent beep sounds when one 
of the bed’s movements is hindered.

When the thigh section is fully raised, the foot section is inclined at an angle of 

approximately -6° from the sleep surface.

Summary of Contents for 900 Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands