manualshive.com logo in svg

Hillrom 900 Series, Instructions For Use Manual

Share
Download
Hillrom 900 Series Instructions For Use Manual Download Page 11

171051(12) - Hillrom™ 900 Electric Bed Instructions for Use

Page 5

Int
rodu
ct

ion

Spe

c

if

ic

at

ions

Use of accessories, transducers and cables other than those specified or provided by 
Hill-Rom could result in increased electromagnetic emissions or decreased 
electromagnetic immunity of this equipment and result in improper operation.

Waste packaging (plastic, cardboard, metal, wood, etc.) must follow suitable 

recovery circuits with a view to being recycled.

Before installing the bed for the first time or after bringing the bed and its 
accessories out of storage:

• ensure that the bed and its various parts are at room temperature,
• only connect the bed to a mains electric power supply with earth protection 

(see “Electrical safety” page 8),

• the power plug must be accessible to disconnect the bed,
• wait 12 hours until the battery is fully charged before using the bed without 

the mains power supply,

• make sure that all the moving parts are in good working order,
• make sure that the bed has been cleaned and disinfected (see 

“Decontamination of the bed” page 75).

Risk prevention

General recommendations

In general: 

• check that nothing (e.g.  objects, accessories or power cable) or any persons 

(e.g. children, limbs) will interfere with the movement of the mobile parts of 
the bed before actuating them. An intermittent beep sounds when one of the 
bed’s movements is hindered.

• during a movement or combination of movements of a mobile part of the bed 

(eg, backrest, sleep surface, siderail), be vigilant (for oneself, the patient or 
any other person) on the risks of pinching or crushing between moving parts 
or with a fixed part.

• always check (e.g. to and fro movements) that the various locking 

mechanisms are in good working order (e.g. siderails, extensions, grip 
handles, brakes).

• sufficiently qualified nursing staff determine the usage condition suitable for 

the various functions and the degree of supervision to ensure that the patient 
uses the bed safely.

Summary of Contents for 900 Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands