manualshive.com logo in svg

Hillrom 900 Series, Instructions For Use Manual

Share
Download
Hillrom 900 Series Instructions For Use Manual Download Page 75

171051(12) - Hillrom™ 900 Electric Bed Instructions for Use

Page 69

He
lp wi

th c

are

5.

Lift the cassette retaining bar and insert the cassette in the landscape or 
portrait direction, as required.

6.

Check that the retaining bar locks the cassette in position.

7.

For portrait images, pull the retaining bar upwards to lock the cassette.

8.

If necessary, adjust the cassette in the sideways direction.

9.

Adjust the position of the cassette using the right and left straps so that the 
retaining bar is positioned on the edge of the mattress.

10. Adjust the cassette positioning buckle. Wind the right strap around the 

mattress and put the buckle on the upper edge of the mattress. Once it has 
been adjusted using the right and left straps, this buckle is used to position 
the top of the cassette as required.

11. Position the patient on the bed with their hips by the marker on the siderail.
12. Adjust the height of the sleep surface and incline the head section as 

required.

Summary of Contents for 900 Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands