171051(12) - Hillrom™ 900 Electric Bed Instructions for Use
Page 49
Mobili
zing th
e patie
n
t
Setting the alerts volume
The volume of the alerts can be set to three levels of
intensity.
1
2
3
Press the “Alerts volume setting” button several times to
increase the volume from 1 to 3 or to return to level 1, etc.
Sending bed exit alerts
Check that the bed is connected to the hospital’s
communications system.
• When a bed exit alert is raised, a signal is automatically sent to the duty
nurse.
• If the bed has a “Nurse call” function, the light under the Nurse call
symbol flashes for 1 minute. If the system acknowledges reception
of the signal during this time, the light turns green. Otherwise, it
goes out automatically.
• The light also goes out if the caregivers confirm reception of the alert.
If the bed detects a connection fault (cable not connected or fault), a
discontinuous signal sounds when the bed exit alert is raised.
NaviCare® system
NaviCare™ is a system used to connect and check Hillrom™ beds and mattresses.
It sends alerts to caregivers. Refer to the NaviCare™ system User Manual for more
detailed information about the use of this system.
Communication cable**
