32
Advanta™ 2 Bed User Manual (157722 REV 2)
Patient Helper Positioning (P1177A)
WARNING:
The Patient Helper in the patient transfer position is designed to help the patient lift some of
his/her weight so as to assist the nursing staff with their work. This position is not designed to
allow patients to transfer themselves alone. Injury could occur.
CAUTION:
If the bed has an IV pole mounted in a head end equipment socket, do not put the Patient
Helper in the “tuck-away” position. Interference with the IV pole may occur.
Use the blue knob marked “TURN” to adjust the Patient Helper position.
To adjust the Patient Helper position:
•
Turn the blue knob a quarter turn clockwise to unlock the Patient
Helper.
•
Put the Patient Helper in the required position.
•
Turn the knob counterclockwise to lock in position.
•
Turn the Patient Helper slightly until it locks into place.
•
Pull the Patient Helper to make sure it does not move.
Normal Position
Tuck-away Position
Patient Transfer Position
Do not transport the bed with the patient helper installed. Remove the patient helper or put it in the Tuck-
away position when not in use. Remove the handle when not in use or during transport.
Summary of Contents for P1190
