Hill-Rom P1190, User Manual

Page: 32 / 62

24 Advanta™ 2 Bed User Manual (157722 REV 2)
NaviCare® Patient Safety Module
The NaviCare® Patient Safety Module (PSM) is an
enterprise system that connects and monitors

Hill-Rom® beds and surfaces. The system sends bed and
surface data to network applications for caregivers to view
and receive alerts. For complete operational instructions for
the NaviCare® PSM, refer to the
NaviCare® Patient Safety
Module User Manual (P004447).
The system’s alerts feature is configured from the
NaviCare® PSM application. The application is turned on
or off at the nurses station; however, the alerts feature can
be deactivated and reactivated from the bed.
An indicator on the control pod shows the status of the alerts feature:
• Inactive—indicator is off
• Active—indicator is on
To Activate
Press the NaviCare control until the indicator comes on.
To Deactivate
Press the NaviCare control until the indicator goes off.
SafeView® Alerts
WARNING:
Use of the SafeView® Alerts is not a substitute for regular
patient observation. Always observe patients in accordance
with facility protocol and good nursing practice. Failure to
do so could cause patient injury.
The SafeView® Alerts are lights that are on both sides of the foot
end of the bed. When the bed is connected to AC power and the
Bed Exit Alarm System is active, the Alerts come on to show the
safety condition of the bed.
WARNING:
The SafeView® Alerts operate only when the bed is connected to AC power; the Alerts do not
operate when the bed is connected to battery power. Always observe patients in accordance
with facility protocol and good nursing practice. Failure to do so could cause patient injury.
The SafeView® Alerts only work when connected to AC power. If the facility wants the alerts to work
during times of power failure, connect the bed to emergency AC power.