Hill-Rom P1190, User Manual

Page: 37 / 62

Advanta™ 2 Bed User Manual (157722 REV 2) 29
CAUTION:
When lowering the upper section of the IV pole, always grasp and hold the upper section of the
pole before pulling the release knob.
The IV pole is a removable, telescopic pole that installs in any of the four equipment sockets on the bed.
The IV pole can hold 25 lb (11 kg).
To install the standard IV pole or ISS pole, insert the IV pole into any of the four equipment sockets on
the bed. Removal is reverse of installation.
NOTE:
Added height is recommended for gravity drain applications.
The Infusion Support System (ISS) consists of a movable and adjustable IV pole. The pole supports IV
pumps or bags in a vertical orientation and raises or lowers the pumps or bags with respect to the system
frame. The ISS pole can hold 20 lb (9 kg).
The head end of the system has attaching points for two mobile ISS. Each ISS can support one infusion
pump plus two liters of intravenous solution.
When using the ISS, it is necessary to use the P163 socket adapter before installing the ISS pole.
Mattress Foot Pad Extender
The mattress pad extender is used to fill in the gap between the mattress and the footboard when the foot
section is extended to its full length.
To Install: insert the extender between the footboard and mattress after the foot section is extended.
Mattress
We recommend that you use one of these mattresses from Hill-Rom:
• NP50—P50A8
• NP100—P100A5
• NP200—P200A5
• AccuMax® VPC—P005460
• Envision® Low Airloss Therapy Surface—P741A
• V-CUE® Dynamic Air Therapy® Unit—P540A
• Flexicair Eclipse® Low Airloss Therapy—P0800020036
• Powered PrimeAire® Surface—P583EA3
• Synergy® Air Elite Low Airloss Alternating Therapy System—P004651
• TempurPedic® Mattress—P3584EA-1
• ZoneAire® Sleep Surface System—P1410EB04/P46209
Refer to the applicable product documentation for user instructions.
It is recommended to use loose fitting, knitted sheets with the mattresses from Hill-Rom.