4.2 Disassemble Motor Bottom Cover
After disassembling the motor bottom cover, you can maintain the lane control board and the
barrier position control board.
Steps
1. Pull or push the barrier to the closed position.
2. Use the Allen wretch (2.5 mm) to loosen the 4 screws (M4 × 8) on the motor bottom cover.
Figure 4-4 M4×8 Screws Position
3. Pull or push the barrier to the open position, and remove the motor bottom cover.
DS-K3B801SX Series Swing Barrier Quick Start Guide
17
Summary of Contents for DS-K3B801SX Series
