HIKVISION DS-K1T342 Series, User Manual

Page: 94 / 205

Table 7-2 Access Control Parameters Descriptions
Parameter Description
Terminal Auth. Mode (Terminal
Authentication Mode)
Select the face recognition terminal's authentication mode. You
can also customize the authentication mode.
Note
●
Only the device with the fingerprint module supports the
fingerprint related function.
●
Biometric recognition products are not 100% applicable to
anti-spoofing environments. If you require a higher security
level, use multiple authentication modes.
●
If you adopt multiple authentication modes, you should
authenticate other methods before authenticating face.
Reader Auth. Mode (Card
Reader Authentication Mode)
Select the card reader's authentication mode.
Enable NFC Card Enable the function and you can present the NFC card to
authenticate.
Enable M1 Card Enable the function and you can present the M1 card to
authenticate.
Door Contact You can select "Open (Remain Open)" or "Close (Remian
Closed)" according to your actual needs. By default, it is Close
(Remian Closed).
Open Duration Set the door unlocking duration. If the door is not opened for
the set time, the door will be locked. Available door locked time
range: 1 to 255s.
Authentication Interval Set the device authenticating interval. Available authentication
interval range: 0 to 65535.
7.9 Time and Attendance Status Settings
You can set the attendance mode as check in, check out, break out, break in, overtime in, and
overtime out according to your actual situation.
Note
The function should be used cooperatively with time and attendance function on the client
software.
DS-K1T342 Series Face Recognition Terminal User Manual
79