HIKVISION DS-K1T342 Series, User Manual

Page: 119 / 205

Enable EM card and authenticating by presenting EM card is available.
Note
If the peripheral card reader supports presenting EM card, the function is also supported to
enable/disable the EM card function.
Enable CPU Card
The device can read the data from CPU card when enabling the CPU card function.
CPU Card Read Content
After enable the CPU card content reading function, the device can read the CPU card content.
Enable ID Card
Enable ID card and authenticating by presenting ID card is available.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Tap Configuration → General Settings → Card Authentication Settings .
Figure 8-8 Card Authentication Page
Select a card authentication mode and tap Save .
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
The device will read card via Wiegand 26 protocol (read 3 bytes).
Wiegand 34 (4 bytes)
The device will read card via Wiegand 34 protocol (read 4 bytes).
8.4.6 Face Parameters Settings
Set face parameters.
DS-K1T342 Series Face Recognition Terminal User Manual
104