Figure 3-3 Configure LED Output Parameters
Note
• To customize the LED resolution, select a standard LCD resolution first and then customize the
resolution within the standard pixels. For example, if you have selected the standard 1080P
LCD resolution, the customized LED resolution cannot exceed 1920 × 1080.
• To change customized resolutions, change the resolutions in the same row or column
simultaneously. Otherwise, an error may occur.
• If multiple devices are cascaded, ensure that your video wall has the same height in the same
row and the same width in the same column.
5. Optional: Configure Background as needed.
6. Optional: Check Batch Configuration to copy the configuration to other decoding outputs.
7. Click OK.
3.1.3 Link Decoding Output to the Video Wall
You must link decoding outputs of your devices to the video wall so that signals can be displayed
on the video wall. All decoding outputs of your devices are displayed on the video wall
configuration interface.
Steps
1. In the Decoding Output list on the left, select the desired decoding outputs and drag them to
the virtual video wall on the right.
Video Wall Controller User Manual
21