• Do not drop the device or subject it to physical shock. Do not install the device on vibratory
surface or places.
• Ensure that the device is installed at a temperature of -10°C to 45°C and a humidity of 10% to
90% RH.
2.1.1 Stacking
If the installation place has limited space, you can choose stacking installation. Stacking means that
devices are placed one on the top of another.
Before You Start
You have left space for wiring and ventilation.
Steps
1. Take out the four rubber feet from the package, and stick them onto the bottom of your device.
Repeat this step to complete the installation of rubber feet of the other devices.
Figure 2-2 Stick Rubber Feet
2. Place one of the device on a flat surface and stack the rest on the top of the device one by one.
Caution
• Ensure that the devices are aligned horizontally and vertically.
• Ensure that the air vents on the sides of the devices are not blocked.
2.1.2 Wall Mount
If you want to mount your device on the wall, you can choose wall-mount installation.
Video Wall Controller User Manual
7