4. Click Add.
3.1.2 Configure Decoding Output Parameters
You can configure the decoding output parameters based on the screen type and resolution of the
physical video wall to achieve the optimal display effect.
Steps
1. In the Decoding Output list on the left, select the desired decoding output and click to enter
the configuration interface.
2. Set Output Type to LCD or LED.
• If your video wall is an LCD type, set the output type to LCD.
• If your video wall is a LED type, set the output type to LED.
3. If your video wall is an LCD type, configure the resolution. You are recommended to configure a
resolution the same as that of the video wall to achieve the optimal image effect.
Figure 3-2 Configure LCD Output Parameters
Note
If multiple devices are cascaded, the LCD resolutions of all the devices must be the same.
4. If your video wall is a LED type, configure the width and height in the text fields. A LED display is
dot-matrix, and the width and height are the dots.
Video Wall Controller User Manual
20