Before You Start
• You have determined and marked the mounting locations on the wall. The recommended
distance between the two mounting holes is 186 mm.
• You have left space for wiring and ventilation.
Steps
1. Drill two mounting screws into the marked locations on the wall.
Note
M4 pan head screws are recommended for mounting, and the head diameter should be greater
than 5 mm but smaller than 9 mm.
2. Align the mounting holes on the bottom of your device and mount your device onto the screws.
Figure 2-3 Mounting Hole Position
3. Repeat the above steps to complete the installation of the rest of your devices.
2.1.3 Magnetic Mount
If you want to mount your device on metal surfaces such as a video wall bracket or the rear of an
LCD screen, you can choose magnetic-mount installation.
Before You Start
• You have determined the mounting locations.
• You have left space for wiring and ventilation.
• You have prepared four magnetic feet and four M3 countersink screws.
Steps
1. Use the four M3 countersink screws to mount the magnetic feet on the bottom of your device.
Video Wall Controller User Manual
8