HIKVISION DS-9100HFI-ST User Manual Download Page 68

Page: 68 / 200

User Manual of DS-9100HFI-ST Series DVR

Figure 5.30 Edit Schedule- Motion| Alarm

To schedule an all-day recording, select the checkbox after the

All Day

item

To arrange other schedule, leave the

All Day

checkbox blank

and set the Start/End time.

Note:

Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other.

Repeat the above steps to schedule for all the week. If the schedule can also be applied to other days, click

Copy

Click

Apply

to save settings.

Click

to back to the upper level menu.

Repeat the above steps to schedule Motion | Alarm or Motion & Alarm triggered recording/capture to other

channels. If the setting can also be applied to other channels, click

Copy

and then choose the channel number.

Summary of Contents for DS-9100HFI-ST









































































































































































































Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands

HIKVISION DS-9100HFI-ST, User Manual

Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands