HIKVISION DS-9100HFI-ST User Manual Download Page 77

Page: 77 / 200

User Manual of DS-9100HFI-ST Series DVR

6.1 Playing Back Record Files

6.1.1 Playing Back by Channel

Purpose:

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.

Instant playback by channel:

Steps:

Choose a channel in live view mode using the mouse and click the

button in the quick setting

toolbar.

Note:

Only record files recorded during the last five minutes on this channel will be played back.

Figure 6.1 Instant Playback Interface

All-day Playback by channel

Enter the All-day Playback interface.

Mouse: right click a channel in live view mode and select All-day Playback from the menu, as shown in

Figure 6.2.

Summary of Contents for DS-9100HFI-ST









































































































































































































Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands

HIKVISION DS-9100HFI-ST, User Manual

Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands