HIKVISION DS-9100HFI-ST User Manual Download Page 104

Page: 104 / 200

User Manual of DS-9100HFI-ST Series DVR

103

Export.

Click

Export

button and start backup.

Note:

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drives or USB HDDs via the device.

Figure 7.7 Export by Normal Video Search using USB Flash Drive

Stay in the Exporting interface until all record files are exported with pop-up message box“Export

finished”.

Figure 7.8 Export Finished

Check backup result.

Choose the record file in Export interface and press button

to check it.

Note:

The Player player.exe will be exported automatically during record file export.

Summary of Contents for DS-9100HFI-ST









































































































































































































Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands

HIKVISION DS-9100HFI-ST, User Manual

Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands