HIKVISION DS-9100HFI-ST User Manual Download Page 78

Page: 78 / 200

User Manual of DS-9100HFI-ST Series DVR

Figure 6.2 Right-click Menu under Live View

Front Panel: press

PLAY

button to play back record files of the channel under single-screen live view

mode.

Under multi-screen live view mode, the recorded files of the top-left channel will be played back.

Note:

Pressing numerical buttons will switch playback to the corresponding channels during playback process.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown

in Figure 6.3.

Figure 6.3 All-day Playback Interface

The channel and time selection menu displays by moving the mouse to the right of the playback interface.

Click the channel(s) if you want to switch playback to another channel or execute simultaneous playback of

multiple channels, as shown in Figure 6.4.

Summary of Contents for DS-9100HFI-ST









































































































































































































Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands

HIKVISION DS-9100HFI-ST, User Manual

Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands