HIKVISION DS-9100HFI-ST User Manual Download Page 46

Page: 46 / 200

User Manual of DS-9100HFI-ST Series DVR

Click

, and use your mouse to drag the image or click the eight directional buttons in the control box

under the image to move the PTZ camera.

The movement of the PTZ is recorded as the pattern.

Click

to save the pattern.

Repeat the above steps to save more patterns.

4.2.6 Calling Patterns

Purpose:

Follow the procedure to move the PTZ camera according to the predefined patterns.

Calling pattern in the PTZ setting interface.

Steps:

Enter the PTZ Control interface.

Select the pattern number.

Click

, then the PTZ moves according to the pattern. Click

to stop it.

Figure 4.12 PTZ- Calling Pattern

Call pattern in live view mode.

Steps:

In the live view mode, press PTZ control on the front panel or on the remote control, or click PTZ

Control icon

on the quick setting toolbar.

And then choose

Pattern

on the control bar.

Click the pattern number you want to call

Summary of Contents for DS-9100HFI-ST









































































































































































































Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands

HIKVISION DS-9100HFI-ST, User Manual

Search results

Summary of Contents for DS-9100HFI-ST

Reviews:

Related manuals for DS-9100HFI-ST

Brands by name

Popular brands