HIKVISION DS-7000HI Series User Manual Download Page 41

Page: 41 / 137

Frame by Frame)

Pause/Continue:

Press

[

ENTER

]

to pause/continue playback. If played

frame by frame, Press

[

ENTER

]

to play one frame.

Copy

segment:

[

EDIT

]

Exit:

[

ESC

]

Playback switch: When in 2-ch playback, press

[

]

to switch between

main channel and second channel.

Note: When DVR is busy, if you select high play speed, maybe there is difference for

actual play speed.

Exit playback

In playback interface, press

[

ESC

]

key to enter into preview mode.

In playback interface, press

[

]

key to enter into main menu, press

[

REC

]

key to

enter into manual record, and press

[

PTZ

]

key to enter into PTZ control mode.

Summary of Contents for DS-7000HI Series










































































































































Search results

Summary of Contents for DS-7000HI Series

Reviews:

Related manuals for DS-7000HI Series

Brands by name

Popular brands

HIKVISION DS-7000HI Series, User Manual

Search results

Summary of Contents for DS-7000HI Series

Reviews:

Related manuals for DS-7000HI Series

Brands by name

Popular brands