HIKVISION DS-7000HI Series User Manual Download Page 33

Page: 33 / 137

4.3 Login

Note: When DVR is delivered from factory, there is only one default

administrator named “admin”, and password is “12345”. The administrator’s name

can not be modified, while the password can be modified. The administrator can

create 15 users and define their user rights.

Use

[

]

[

]

keys to select one user, press

[

]

key to enter into “Password” edit box,

input corresponding password, press

[

ENTER

]

key to exit edit box. The “Active Frame”

will be moved to “Confirm” button. Press

[

ENTER

]

key to enter into main menu. If there is

beeper alarm, it means the user name and password are not matched. After three error

times, DVR will enter into live view mode.

Summary of Contents for DS-7000HI Series










































































































































Search results

Summary of Contents for DS-7000HI Series

Reviews:

Related manuals for DS-7000HI Series

Brands by name

Popular brands

HIKVISION DS-7000HI Series, User Manual

Search results

Summary of Contents for DS-7000HI Series

Reviews:

Related manuals for DS-7000HI Series

Brands by name

Popular brands