User Manual of DS-6500DI–T Universal Network Decoder
41
Run the disk of iVMS-4200 software, and double click the icon to install it in your PC. In this chapter, the basic
procedure of operating the decoder by the software is described.
Please refer to the user manual of iVMS-4200 for more detailed information.
The following figure shows the main interface after accessing to the software:
Figure 5.1 Control Panel
Note:
The software is capable of many functions as the controlling and managing for many devices, such as the
DVR, NVR, etc. In this manual, only the operation related to the decoder is introduced.
5.1 Adding an Encoder
Steps:
1.
Click
in the control panel to enter the decoding device management interfaces.
2.
Click
to enter the Add Device interface.
3.
Add the device by IP address or private domain name (IP Server/HiDDNS). You can also add the third-
party encoding device.
Task1:
Add an Encoder by IP Address
1)
Edit the nickname of the encoding device.
2)
Enter the IP address, port, login user name and password.
3)
Click
Add
to add the device.
Summary of Contents for DS-6500DI-T
Page 1: ...Universal Network Decoder User Manual V1 0 0 UD 6L0203D1078A01...
Page 7: ...User Manual of DS 6500DI T Universal Network Decoder 6 CHAPTER 1 Introduction...
Page 9: ...User Manual of DS 6500DI T Universal Network Decoder 8 CHAPTER 2 Panels and Connections...
Page 53: ...User Manual of DS 6500DI T Universal Network Decoder 52 CHAPTER 6 Specifications...