User Manual of DS-6500DI–T Universal Network Decoder
32
Steps:
Alarm Input Settings
1.
Click
Configuration
>
Alarm Settings
>
Alarm Input
to enter the alarm setting interface.
2.
Set the
Alarm Sensor Type
for the selected alarm input and configure the Alarm Input Handling
actions. By default, the Alarm Mode is in NO (Normally Open).
Figure 4.33 Configure Alarm Input Settings
3.
Click
Save
to save the settings.
Alarm Output Settings
1.
Click
Configuration
>
Alarm Settings
>
Alarm Output
to enter the alarm setting interface.
2.
Select the alarm output, you can also customize the output delay time. Output delay time refers to the
duration of the alarm after the alarm output, for example, when you set the alarm output delay time as
10 seconds, when an alarm occurs the alarming time lasts 10 seconds later than the time of the alarm
stopped.
3.
Click
Save
to save your settings.
Figure 4.34 Configure Alarm Output Settings
4.2.7 Configuring Arming Time
Purpose:
Set the time schedule for alarm input and alarm output.
Steps:
1.
Click
Configuration
>
Arming Time
to enter the following interface.
Summary of Contents for DS-6500DI-T
Page 1: ...Universal Network Decoder User Manual V1 0 0 UD 6L0203D1078A01...
Page 7: ...User Manual of DS 6500DI T Universal Network Decoder 6 CHAPTER 1 Introduction...
Page 9: ...User Manual of DS 6500DI T Universal Network Decoder 8 CHAPTER 2 Panels and Connections...
Page 53: ...User Manual of DS 6500DI T Universal Network Decoder 52 CHAPTER 6 Specifications...