User Manual of DS-6500DI–T Universal Network Decoder
31
Console
: use the RS-232 serial port for debugging the decoder.
Transparent Channel
: use the RS-232 serial port as the transparent channel.
4.
Click
Save
to save the settings.
Configuring RS-485 Parameters
Steps:
1.
Click
Configuration
>
Serial Port Settings
>
RS-485 Port
to enter the following interface:
Figure 4.32 Configure RS-485 Settings
2.
Configure the RS-485 parameters, including the baud rate, data bit, stop bit and parity type.
3.
Click
Save
to save the settings.
4.2.6 Configuring Alarm Input / Output Settings
Purpose:
As the Decoder is unable to obtain the alarm signal over network, it must be connected with external alarm
input/output.
Summary of Contents for DS-6500DI-T
Page 1: ...Universal Network Decoder User Manual V1 0 0 UD 6L0203D1078A01...
Page 7: ...User Manual of DS 6500DI T Universal Network Decoder 6 CHAPTER 1 Introduction...
Page 9: ...User Manual of DS 6500DI T Universal Network Decoder 8 CHAPTER 2 Panels and Connections...
Page 53: ...User Manual of DS 6500DI T Universal Network Decoder 52 CHAPTER 6 Specifications...