User Manual of DS-6500DI–T Universal Network Decoder
30
•
HiDDNS:
(1)
Enter the
Server Address
of the HiDDNS server:
(2)
Enter the
Domain
Name of the device. You can register the alias of the device domain name in the
HiDDNS server first and then enter the alias to the domain name in the decoder; you can also enter
the domain name directly on the decoder to create a new one.
Note:
If a new alias of the device domain name is defined in the decoder, it will replace the old one
registered on the server.
(3)
Click
Save
to save the settings.
Figure 4.30 HiDDNS Settings
Note:
After having successfully registered the device on the HiDDNS server, you can access your device via web
browser or Client Software with the Device Domain Name (Device Name).
4.2.5 Configuring RS-485/RS-232 Serial Port
Configuring RS-232 Parameters
Steps:
1.
Click
Configuration
>
Serial Port Settings
>
RS-232 Port
to enter the following interface:
Figure 4.31 Configure RS-232 Settings
2.
Configure the RS-232 parameters, including the baud rate, data bit, stop bit and parity type.
3.
Select the Operating Mode of RS-232 to Console or Transparent Channel.
Summary of Contents for DS-6500DI-T
Page 1: ...Universal Network Decoder User Manual V1 0 0 UD 6L0203D1078A01...
Page 7: ...User Manual of DS 6500DI T Universal Network Decoder 6 CHAPTER 1 Introduction...
Page 9: ...User Manual of DS 6500DI T Universal Network Decoder 8 CHAPTER 2 Panels and Connections...
Page 53: ...User Manual of DS 6500DI T Universal Network Decoder 52 CHAPTER 6 Specifications...