User Manual of DS-6500DI–T Universal Network Decoder
12
Purpose:
If you don’t know the IP address of the decoder and this is not the first time you use the decoder, you can use the
online device detection feature of the iVMS-4200 client software, SADP software (IP finder) or the serial port
tools to find out the IP address of the decoder and to configure the IP address or other network parameters of it. It
is recommended to change the default IP address for the first time to use it.
This chapter aims to tell the procedures of using the SADP software to find and configure the IP address and
other parameters of the device.
Notes:
1.
You can download the SADP software from the website of our company.
2.
For the first-time user, the default user name of DS-6500DI-T is admin, and password is 12345. And the
default IP address is 192.0.0.64.
3.1
Searching Active Devices Online
Search online devices automatically
Click
to run the SADP software and it will automatically search the online devices every 15
seconds from the subnet where your computer locates. It displays the total number and information of the
searched devices in the
Online Devices
interface. Device information including the device type, IP address, port
number, gateway, etc. will be displayed.
Figure 3.1 Search Online Device by SADP
Note:
Device can be searched and displayed in the list in 15 seconds after it goes online; it will be removed from
the list in 45 seconds after it goes offline.
Search online devices manually
Summary of Contents for DS-6500DI-T
Page 1: ...Universal Network Decoder User Manual V1 0 0 UD 6L0203D1078A01...
Page 7: ...User Manual of DS 6500DI T Universal Network Decoder 6 CHAPTER 1 Introduction...
Page 9: ...User Manual of DS 6500DI T Universal Network Decoder 8 CHAPTER 2 Panels and Connections...
Page 53: ...User Manual of DS 6500DI T Universal Network Decoder 52 CHAPTER 6 Specifications...