DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
9
Chapter 2
Network Connection
NOTES:
»
You shall acknowledge that the use of the product with Internet access might be under network security risks.
For avoidance of any network attacks and information leakage, please strengthen your own protection. If the
product does not work properly, please contact with your dealer or the nearest service center.
»
To ensure the network security of the network camera, we recommend you to have the network camera
assessed and maintained periodically. You can contact us if you need such service.
Before you start:
•
If you want to set the network camera via a LAN (Local Area Network), please refer to
Section 2.1
Setting the Network
Camera over the LAN
.
•
If you want to set the network camera via a WAN (Wide Area Network), please refer to
Section 2.2
Setting the
Network Camera over the WAN
.
Setting the Network Camera over a LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the network camera in the same subnet as your
computer, and install the SADP or Hik-Connect software to search and change the IP of the network camera.
NOTE:
For detailed introduction to SADP, refer to Appendix 1.
Wiring over the LAN
The following figures show the two ways of cable connection of a network camera and a computer:
Purpose:
•
To test the network camera, you can directly connect the network camera to the computer with a network cable as
shown in Figure 2-1.
•
Refer to the Figure 2-2 to set network camera over the LAN via a switch or a router.
Network Cable
or
Network Camera
Computer
Figure 1, Connecting Directly
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...
