HIKVISION DS-2CD2D21G0/M-D/NF User Manual Download

Page: 45 / 160

DS-2CD2D21G0/M-D/NF User Manual

UM DS-2CD2D21G0/M-D/NF 020319NA

available. It helps allocate more resources to the desired functions.

Enter VCA Resource configuration interface,

Configuration > System > System Settings > VCA Resource

Select a desired VCA combination. Available VCA combination varies by camera model.

Click

Save

to save the settings. A reboot is required after setting the VCA Resource.

NOTES:

VCA combinations are mutually exclusive. When you activate one combination, the others are hidden.

The function may not be supported by some camera models.

Open Source Software License

Information about the open source software that applies to the IP camera can be checked if required. Go to

Configuration > System Settings > About.

Maintenance

Upgrade and Maintenance

Purpose:

The upgrade and maintenance interface allows you to process the operations, including reboot, partly restore, restore to
default, export/import the configuration files, and upgrade the device.

Enter the Maintenance interface,

Configuration > System > Maintenance > Upgrade & Maintenance

•

Reboot

: Restart the device.

•

Restore:

Reset all the parameters, except the IP parameters and user information, to the default settings.

•

Default

: Restore all the parameters to the factory default.

NOTES:

After restoring the default settings, the IP address is restored to the default IP address, please be careful for
this action.

For camera that supports Wi-Fi, wireless dial, or WLAN function,

Restore

action does not restore the related

settings of mentioned functions to default.

•

Information Export

Device Parameters:

Click to export the current configuration file of the camera. This operation requires admin

password to proceed.

For the exported file, you also have to create an encryption password. The encryption password is required when
you import the file to other cameras.

Summary of Contents for DS-2CD2D21G0/M-D/NF

































































































































































Search results

Summary of Contents for DS-2CD2D21G0/M-D/NF

Reviews:

Related manuals for DS-2CD2D21G0/M-D/NF

Brands by name

Popular brands

HIKVISION DS-2CD2D21G0/M-D/NF, User Manual

Search results

Summary of Contents for DS-2CD2D21G0/M-D/NF

Reviews:

Related manuals for DS-2CD2D21G0/M-D/NF

Brands by name

Popular brands