DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
106
3.
Check the
Enable Dynamic Analysis
checkbox for Face Detection, and detected faces will be marked with a green
rectangle on the live video.
NOTE:
To mark the detected face on the live video, go to Configuration > Local to enable the Rules.
4.
Click-and-drag the slider to set the detection sensitivity. The sensitivity ranges from 1 to 5. The higher the value, the
more easily the face will be detected.
5.
Click
Arming Schedule
to set the arming schedule. Refer to
Task 2 Set the Arming Schedule for Motion Detection
in
Section 10.1.1
for detailed steps
.
6.
Click
Linkage Method
to select the linkage methods for face detection. Refer to
Task 3: Set the Linkage Method
Taken for Motion Detection
in
Section 10.1.1.
Figure 104, Face Detection
7.
Click
Save
to save the settings.
Configuring Intrusion Detection
Purpose:
The Intrusion Detection function detects people, vehicles, or other objects that enter and loiter in a pre-defined virtual
region, and certain actions can be taken when the alarm is triggered.
NOTE:
The Intrusion Detection function varies by camera model.
Summary of Contents for DS-2CD2D21G0/M-D/NF
Page 1: ...DS 2CD2D21G0 M D NF Pinhole and Covert Mini Network Cameras User Manual ...
Page 8: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 7 Appendix 156 ...
Page 34: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 33 ...
Page 68: ...DS 2CD2D21G0 M D NF User Manual UM DS 2CD2D21G0 M D NF 020319NA 67 ...