HIKVISION DS-2CD2D21G0/M-D/NF, User Manual, Page: 132 / 160

DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA 131
2. Check the Enable Counting checkbox to enable the function.
3. Check the Enable OSD Overlay checkbox, and the real-time number of people that entered and exited is displayed on
the live video.
4. Set the detection line. An orange line, known as a detection line, can be set on the live video, and an object entering or
exiting through the line will be detected and counted.
A. Click to draw a detection line, and an orange detection line will appear on the image.
NOTES:
» The detection line should be drawn at a position right below the camera, and it should cover the whole
entrance/exit.
» Draw the detection line at a position that won’t have many people lingering.
B. Click-and-drag the detection line to adjust its position.
C. Click-and-drag the two end points of the detection line to adjust its length.
D. Click to delete the detection line.
E. Click to to change the direction.
5. Click the button, and the number of people that entered and exited will be cleared to zero.
6. Click Arming Schedule to enter the arming schedule interface, and click-and-drag the mouse on the time bar to set the
time.
7. Check the Linkage Method tab to select the linkage method.
8. Click Save to save the settings.
NOTE: The counting statistics will be calculated under the Application tab. Go to Application to check the
counting statistics.
Heat Map
Heat map is a graphical representation of data represented by colors. The heat map function of the camera usually is used
to analyze the visit times and dwell time of customers in a configured area.
1. Enter the Heat Map configuration interface: Configuration > Heat Map .