HIKVISION DS-2CD2D21G0/M-D/NF, User Manual, Page: 106 / 160

DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA 105
NOTE: The Scene Change Detection function varies by camera model.
1. Enter the Scene Change Detection settings interface, Configuration > Event > Smart Event > Scene Change
Detection .
Figure 103, Scene Change Detection
2. Check the Enable checkbox to enable the function.
3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value ranges from 1 to 100, and the higher the
value, the more easily the change of scene will trigger the alarm.
4. Click Arming Schedule to set the arming schedule. Refer to Task 2 Set the Arming Schedule for Motion Detection
in Section 10.1.1 for detailed steps .
5. Click Linkage Method to select the linkage methods for scene change, including Notify Surveillance Center , Send
Email , Upload to FTP/Memory Card/NAS , Trigger Channel , and Trigger Alarm Output .
6. Click Save to save the settings.
Configuring Face Detection
Purpose:
The Face Detection function detects faces that appear in the surveillance scene, and certain actions can be taken when the
alarm is triggered.
1.
Enter the Face Detection settings interface, Configuration > Event > Smart Event > Face Detection .
2.
Check the Enable Face Detection checkbox to enable the function.