User Manual of 4-inch High Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
28
TIME TASK
TASK NUM 1
TASK STATE ON
TASK ACTION NONE
TASK TIME
TASK PREVIEW
TASK CLEAR
BACK EXIT
Figure 3-20
Time Task Configuration Menu
3.
Set the task status.
Steps:
(1)
Move the cursor to
TASK STATE
and click
IRIS+
to enter edit mode.
(2)
Click the up and down direction buttons to set the task status to
ON
.
(3)
Click
IRIS+
again to confirm and exit edit mode of this column.
4.
Configure the task action.
Steps:
(1)
Move the cursor to
TASK ACTION
and click the
IRIS+
to enter edit mode.
(2)
Click the up and down direction buttons to select the task action from preset 1 to 8, pattern
1 to 4, patrol 1 to 8, panning scan, tilting scan, random scan, frame scan, panoramic scan,
day mode, night mode and none.
(3)
Click
IRIS+
again to confirm and exit edit mode of this column.
5.
Set the task time.
Steps:
(1)
Move the cursor to
TASK TIME
and click
IRIS+
to enter edit mode.
(2)
Click the left and right direction buttons to position the cursor to
WEEK
,
START (H-M)
and
END (H-M)
.
(3)
Click the up and down direction buttons to select the specific day and time.
(4)
Click
IRIS+
to confirm and exit.
Note:
The weekday can be set to be from
Monday
to
Sunday
or
Whole Week
.
WEEK WHOLE WEEK
START(H-M) 00 00
END(H-M) 00 00
DONE: OPEN
QUIT: CLOSE
Figure 3-21
Set the Task Time