User Manual of 4-inch High Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
27
remaining memory shown under
PATTERNS
menu as
REMAINING
.
The panning/tilting movements and the lens operations cannot be memorized
simultaneously.
Task 2:
Preview the pattern.
Enter the
PREVIEW
menu to preview the current pattern.
Task 3:
Delete the patterns.
Delete a chosen pattern
Click
IRIS+
to enter
EIDT PATTERN
and you can see
DEL PATH ABOVE
. Click
IRIS+
to delete the
pattern.
Note:
If you delete the current pattern, the following pattern will also be deleted. E.g., if pattern
2 is deleted, pattern 3 and pattern 4 will be deleted as well.
Clear all the patterns
Enter
CLEAR PATTERN
menu and click
IRIS+
to delete all the defined patterns.
Task 4:
Call the defined pattern.
You can select the corresponding preset number from the drop-down preset list in the control
panel of the DVR through a web browser, and click the arrow to call the related pattern. E.g. call
preset 41 to call pattern 1. Please refer to
Section 2.3
to find the corresponding preset number
for each pattern.
3.4.5
Configuring Time Tasks
Purpose:
A time task is a scheduled dome action which can be configured to perform automatically at the
specific time.
Task 1:
Set time tasks.
Steps:
1.
Move the cursor to enter the
TIME TASK
submenu:
MAIN MENUS > DOME SETTINGS > TIME TASK
2.
Choose the task number.
Steps:
(1)
Move the cursor to
TASK NUM
and click
IRIS+
to enter edit mode.
(2)
Click the up and down direction buttons to select the number of the task which is to be
configured.
(3)
Click
IRIS+
again to confirm and exit edit mode of this column.
Note:
You can configure up to 8 tasks.