User Manual of 4-inch High Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
16
CAMERA
WIDE LIMIT N/A
CHROMA SUPPRESS 2
SATURATION 3
CONTRAST 2
HLC 0
HR MODE OFF
GAIN LIMIT 15
BACK EXIT
Figure 3-6
Further Settings
Task 8:
Configure the image quality parameters:
Chroma suppress:
You can adjust the value of
CHROMA SUPRESS
between 0, 1, 2 and 3
to
suppress the color noises in low lighting environment. Higher setting values produce stronger
chroma suppressing effects.
Saturation:
The
SATURATION
value ranges from 0 to 7.
Contrast:
adjust the image contrast on
CONTRAST
submenu between 0 and 7.
Note:
The selectable values of contrast and saturation vary depending on the models of speed
dome.
HLC
: High Light Compensation (HLC) masks strong light sources that usually flare across a scene.
This makes it possible to see the detail of the image that would normally be hidden. The value
ranges from 0 to 3.
Resolution setting:
you can set
HR MODE
as
ON
to adjust the resolution lower to avoid cross
color of the image, or switch if
OFF
to disable the function. This mode enhances edges and
produces higher definition images.
Task 9:
Configure the advanced settings.
Exposure compensation function:
You can set the
EXPOSURE COMP
value from 0 to 14. The default value is 7.
White balance:
You can set
WHITE BALANCE
mode as
AUTO
,
INDOOR
,
OUTDOOR
,
SELFDEF
(self-defined),
ATW
(auto-tracking) and
HAUTO
(half-auto).
AUTO:
In Auto mode, the dome retains color balance automatically according to the current color
temperature.
INDOOR
,
OUTDOOR:
These two modes are for indoor use and outdoor use respectively.
SELFDEF:
In this mode, you can adjust the color temperature manually to meet your own demand.
Note:
In
SELFDEF
mode, you need to adjust the
RED
and
BLUE
values manually.
ATW:
In auto-tracking mode, white balance is continuously being adjusted in real-time according to
the color temperature of the scene illumination.
HAUTO: