Setting Up Your Device 51
•
When you enter a long distance phone number that starts with “+1”, the “+” will be removed and
the rest of the number will be dialed. For example, if you e1 416 123 4567, the number to
be dialed will be 14161234567.
•
When you enter an international phone number that starts with a “+” followed by a digit other
than 1, the “+” will be replaced with the United States international dialing code, which is already
set by default. For example, if you e58 212 123 4567, the number to be dialed will be
011582121234567.
4.
To place calls to the United States from another country, select Disable under North American dialing
and change the international dialing code to the one used by the country where you are in.
So when you dial a phone number that starts with “+” followed by any digit (0 - 9), the “+” will be
replaced with the international dialing code of the country where you are in.
Tip
If you modified the international dialing code, you can tap
Reset
to change it back to the default.
4.4 Protecting Your Device
Protect your device with a password
You can prevent unauthorized access to your device by using password protection. To keep your data more
secure, you can set your device to prompt for a password every time the device is turned on or when your
device has been idle after a specified amount of time.
To set a device password
1.
Tap
Start > Settings > Personal tab > Lock
.
2.
elect the
Prompt if device unused for
check box, and in the box to the right, select how long your
device must be idle before a password is required. In the
Password type
box, select the type of
password you would like to use. Enter the password and, if necessary, confirm the password.
If your device is configured to connect to a network, use an alphanumeric password for increased
security for your device.
3.
On the
Hint
tab, enter a phrase that will help you remember your password, but does not allow others
to guess your password.
The hint will be displayed after the wrong password is entered four times.
4.
Tap
OK
. The next time the device is turned on, you will be prompted to enter your password.
Notes
•
Each time a wrong password is entered, the device response time gets longer until the device appears to be
not responding.
•
If you forget your password, you must follow the instructions in this user manual to clear the memory before
you can access your device.
To change your password
1.
Tap
Start > Settings > Personal
tab
> Lock
. You will be prompted to enter your current password.
2.
In the
Password
box, enter your new password.
3.
Tap
OK
.
Summary of Contents for PDA Phone
