High End Systems Studio Command 1200, User Manual

Page: 36 / 108

CHAPTER 3
The Menu System
26 Studio Command Series User Manual
Set Menu (SET)
The Set menu allows you to lock the fixture, and either set all factory options to their default
settings or access and change the factory options individually. The procedures below are listed
in the same order shown on the menu map (see Appendix D: Menu Map).
Setting Factory Defaults (FACT)
When you set this menu item on, all factory options return to their default settings. Studio
Command fixtures are shipped from the factory with the following default option settings:
Note: To change the preset playback option, see Setting Preset Playback
(PLAY) on page 23.
The factory default menu option displays On if all the factory options are at the factory default
settings. If any of the items listed above are not at the factory default setting, the display reads
OFF. Selecting the OFF option will have no effect. To restore the factory default setting:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the SET menu. Press <Enter> to select.
3. Scroll to the FACT menu (this will be the first menu displayed). Press <Enter>.
4. Scroll to ON to restore the factory option defaults.
5. Press <Enter> to store.
Swapping Pan and Tilt (SWAP)
Fixture hung perpendicular
to each other
This menu option swaps the pan motor and tilt motor
operation to allow fixtures hung perpendicular to each other
to respond to pan and tilt movement commands in the
same direction. To swap pan and tilt motion:
1. Press and hold <Menu> until AddR appears on
the LED display.
2. Scroll to the SET menu. Press <Enter> to
select.
3. Scroll to the SWAP menu. Press <Enter> to
select.
4.
or
Scroll to ON to swap the fixture’s pan and tilt
motion, or OFF to return the fixture’s pan and
tilt motion to normal orientation.
5. Press <Enter> to store.
pan/tilt swap = off
tilt invert = off
pan invert = off LED display = on and bright
LED display invert = off
lamp life warning = off shutter close with DMX data loss = short
fast pan/tilt movement = off
preset playback = off