High End Systems Studio Command 1200, User Manual

Page: 33 / 108

CHAPTER 3
The Menu System
Studio Command Series User Manual 23
Preset Menu (PRST)
Studio Command fixtures have 16 preset scenes for each of two user modes (A and B) for a
total of 32 preset scenes. Some Preset menu options can be accessed for either user mode.
However, you must first set the fixture to User A or User B. For more information, see Setting
the User Type (USER) on page 30.
The Preset menu allows you to turn preset playback off or on, view which scene is currently
playing, create/edit a scene using the on-board memory to program the fixture for standalone
operation, copy a scene from the on-board memory to another scene, and capture a scene from
your DMX console to the on-board memory. This menu also allows you to enable the factory-
programmed preset sequence.
For a detailed example of using Preset programming for Scene creation, Looping and
Synchronizing Playback, see page 42.
Setting Preset Playback (PLAY)
This menu option allows you to view which scene is currently playing in preset playback mode or
turn preset playback on or off. Before using this menu option, you need to have the user mode
for the desired scene already selected, see Setting the User Type (USER) on page 30.
Note: Scene 1 must be programmed before the fixture can play back scenes.
To set Preset Playback on or off, or to view the current scene:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the PRST menu and press <Enter> to select.
3. Scroll to the PLAY menu (this will be the first menu displayed).
Press <Enter> to select.
or
or
4. Scroll to ON to set preset playback on,
OFF to set preset playback off, or
SCN to display which scene is currently playing.
5. Press <Enter> to store selection.