NGS Mach II User Guide v1.1
View Recorder Areas
25
As you move the cursor, notice:
• the PID value (middle number in the
margin) may change, and
• the time corresponding to the PID value
(middle number at the bottom of the
screen) changes.
Although you can choose four PIDs for
playback, you can view only two at a time
on the graph. However, you can rotate
through all of the PIDs you selected by
pressing buttons
2
and
6
:
2
rotates through selected PIDs
displaying in the left margin
6
rotates through selected PIDs
displaying in the right margin
6
also cancels the graph of the
second PID (screen’s right margin)
so you can isolate a PID (screen’s left
margin) and display its graph alone
on the screen
TIME
T
0.0
+
0.8
+
1.6
SEC
ECT
1.18
1.17
1.18
VDC
PFE
0.69
068
0.68
VDC
IAC
60
52
52
%
SPARK
45.00
45.75
45.75
DEG
INFO
REW
STOP
PLAY
FWD
Table
INFO
Displays the setup information from that
recording.
This option is not available at this time.
REW
,
PLAY
,
FWD
and
STOP
act like the controls
on a tape recorder. You can move forward and
backward through the recording by pressing
these buttons.
You can also play back the recording step by
step by turning the dial.
