NGS Mach II User Guide v1.1
11
Getting Started
4. NGS Mach II displays the following screen
with the selected vehicle highlighted:
2008 CROWN VICTORIA
4.6L
SELECT NEW VEHICLE YEAR & MODEL
DESELECT CURRENT MODEL
SELECT ITEM AND PRESS TRIGGER TO START
d
• To accept the selected vehicle, press
TRIGGER
to return to the Main Menu.
NGS Mach II displays the selected
vehicle in the Main menu:
1 )MODEL : 2008 CROWN VICTORIA
4.6L
2)MODULE: _ _ _ _
3)ACTION : _ _ _ _
4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
d
• To select a different vehicle, highlight
SELECT MODEL
and then press
TRIGGER
. Repeat the above steps to
reselect a vehicle.
• To deselect the current vehicle,
highlight
DESELECT CURRENT MODEL
and then press
TRIGGER
. Repeat the
above steps to reselect a vehicle.
Selecting a Module
When you hookup NGS Mach II and make the
correct vehicle and engine selection, NGS
Mach II lists modules that are more than likely
present based on the vehicle and engine
selection.
However, not all modules listed
may be installed on your particular vehicle.
To choose a module, follow these steps:
1. Highlight MODULE and then press TRIGGER.
1 )MODEL : 2008 CROWN VICTORIA
4.6L
2)MODULE: _ _ _ _
3)ACTION : _ _ _ _
4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
d
2. NGS Mach II displays a list of modules for
the vehicle selected. Highlight the desired
module, and then press
TRIGGER
.
PCM -POWERTRAIN CONTROL MODULE
ABS -ANTI LOCK BRAKE MODULE
DDM -DRIVERS DOOR MODULE
EATC -ELECT AUTO TEMP CTRL MODULE
ICM -INSTRUMENT CLUSTER MODULE
LCM -LIGHTING CTRL MODULE
MCM -MESSAGE CENTER MODULE
RCM -RESTRAINT CONTROL MODULE
VDM -VEHICLE DYNAMICS MODULE
SELECT ITEM AND PRESS TRIGGER TO START
3. NGS Mach II displays the selected module
in the Main menu:
1 )MODEL : 2008 CROWN VICTORIA
4.6L
2)MODULE: PCM -POWERTRAIN CONTROL
3)ACTION : _ _ _ _
4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
d
