www.hi-velocity.com
© 1995-2020 Energy Saving Products Ltd.
© 1995-2020 Energy Saving Products Ltd.
To change from up/right (standard) configuration to up/left configuration, follow the steps below.
Change Configuration
1)
Remove front door
from module. (Fig. 04)
Fig. 04
2)
Remove drain pan
by sliding it out from the
bottom. (Fig. 05)
Fig. 05
-4-
-4-
4)
Rotate entire unit 90
deg. clockwise. (Fig. 07)
Fig. 07
6)
Replace the drain
pan in (new) bottom
location. (Fig. 09)
Fig. 09
Fig. 06
3) Slide out the air
flow deflector plate. (Fig.
06)
Fig. 08
5) Slide the air flow
deflector plate back
into the section it was
removed from, in the new
orientation. (Fig. 08)
Fig. 10
7)
Remove round
knock-outs on the door
to fit drain lines. Plug
previously used drain
holes with provided plugs.
(Fig. 10)
Insert
Plugs
Remove
Knock-Outs
Fig. 11
Return Air
Knock-Out
8)
Replace front door
on module. (Fig. 11)
Module RBM
RBM Refrigerant Base Module Installation
Summary of Contents for RBM-100
Page 2: ......
