Hi-Tech Solutions C5, Installation And Operation Manual

Page: 62 / 71

60 Ground Loops Specifications
Appendix B
Enclosure Wiring
Connecting C5 secondary camera
The C5 unit is supplied with external cables; connect each cable to his function as follows:
i. Utility cable for C5 (Power, Loop, and Gate), 5m length includes:
a) Power Supply
Red wire for +15VDC
Black Wire for Ground
b) Gate Relay output:
Brown fir for common Gate(COM)
Blue wire for Normally Close (N.C.)
Yellow for Normally Open (N.O.)
c) Loop connector input:
Green wire for LOOP Common
White wire for LOOP
ii. Ethernet LAN Cable (RJ45 male connector), 5m length Shielded.
Connecting secondary camera in stereo mode
Additional 3 wire cable for external secondary camera is connected to the Secondary
camera (connect VIA terminal block) includes Illumination control input:
White wire connect to secondary LSB white wire
Green wire connect to Secondary MSB Green wire
Black wire connect to Secondary Black wire
Power supply (secondary camera has its own power supply) use the same terminal
block for connecting the two wires:
Red wire for +15VDC
Black Wire for Ground shared with the Black wire connect to Secondary Black
wire
It is important to connect all ground wires together.