Hi-Tech Solutions C5, Installation And Operation Manual

Page: 67 / 71

C5 Installation and Operation Guide Installation Verification Checklist 65
Appendix D
Installation Verification Checklist
# Group Test or Verify Test Methods and
Expected Results Pass /
Fail Comments
1 Power The power supply is installed
and running. Visual observation.
Verify that the power LEDs
are ON on the power supply
and inside the camera
housing power board.
The UPS is installed,
powered, and connected. Unplug the UPS power cord
and verify that C5 is awake.
Optional
Loop Controllers are wired
and powered by the main
power in the cabinet and on
the I/O Board. Visual observation.
Verify power LEDs are ON
the power supply and inside
the camera housing I/O
board.
All cameras are connected to
the power supply. Visual observation.
Verify that the camera power
LEDs are on.
All cameras are connected to
the LAN connection inside the
camera.
Visual observation.
Verify that the camera power
LEDs are on.
2 Software C5 Portal is up. Operate the C5 portal by
navigating to the web site.
3 Ground Loop
and
Ground Loop
Controllers Loop Controller
Activate it by driving on the
ground loop. The ground loop is installed
according to manufacturer
datasheet (number of turns,
dimensions, etc.). Optional
The ground loop controller
shows activity (LED) when it
is activated.
The ground loop controller is
working in presence mode.
4 I/O Card Wires have labels and are
tightened to enclosure at I/O
board.
Function Click image and check the
two green LEDs on I/O
board lighting per
illumination levels operating.
5 Camera For each camera:
Go to image page in the
Portal main page option.
Camera is on.
Camera is mounted to the
wall or to a pole with correct
bolts.